Storing stations
Storing stations manually
There are twenty presets available for the FM and AM wavebands.
Quick save: press and hold a number key, e.g. , until you hear a tone.
The station is stored.
Directly in the station presets: press the COMAND controller when the display/selection window is active.
or
Select Presets by sliding and turning the COMAND controller and press to confirm.
In both cases, the station presets appear.
The dot indicates under which preset the currently selected station is stored.
Example display: station presets
Select a preset by turning the COMAND controller and press and hold until you hear a tone.
The station is stored under the preset.
Storing stations automatically
This function automatically stores stations with adequate reception under the presets.
The search starts at the lowest frequency.
COMAND stores any stations found, beginning with preset 1. The storing process ends once the highest frequency has been reached or once ten stations have been found. Any stations stored manually under the presets will be lost. COMAND may not occupy all memory slots when storing.
Option 1: press the COMAND controller when the display/selection window is active.
The station preset memory appears.
Option 2: select Presets by sliding and turning the COMAND controller and press to confirm.
The station preset memory appears.
Irrespective of the option, select Autostore and press to confirm.
In both cases, COMAND searches for stations that can be received. You will see a message to this effect. The available stations are automatically stored in the preset positions.
To cancel storing: select Cancel and press to confirm.
See also:
Cleaning the wiper blades
WARNING
Before cleaning the windshield or wiper
blades, switch off the windshield wipers and
remove the SmartKey from the ignition lock.
On vehicles with KEYLESS-GO, press the
Start/Stop butt ...
Important safety notes
WARNING
In order to avoid possible loss of vehicle control, all seat, head restraint,
steering wheel and rear view mirror adjustments, as well as fastening of seat belts,
must be done before ...
Overview: changing bulbs/bulb types
You can change the following bulbs. The bulb
type can be found in the legend.
Bi-Xenon headlamps (vehicles with halogendaytime running lamps)
1 High-beam spot lamp: H7 55 W
Bi-Xenon headlamps ...