Changing the settings of the locking system
You can change the setting of the locking system in such a way that only the driver's door and the fuel filler flap are unlocked. This is useful if you frequently travel on your own.
To change the setting: press and hold down the and buttons simultaneously for approximately six seconds until the battery check lamp flashes twice.
If the setting of the locking system is changed within the signal range of the vehicle, pressing the or button locks or unlocks the vehicle.
The SmartKey now functions as follows:
To unlock the driver's door: press the
button once.
To unlock centrally: press the
button twice.
To lock centrally: press the
button.
The KEYLESS-GO function is changed as
follows:
To unlock the driver's door: pull the door
handle on the driver's door.
To unlock centrally: pull the door handle
on the front-passenger door or on the rear
doors.
To lock centrally: touch the outer sensor
surface on one of the door handles.
See also:
Important safety notes
WARNING
It is dangerous to shift the automatic
transmission out of parking position P or
neutral position N if the engine speed is
higher than idle speed. If your foot is not firmly
on the ...
Important safety notes
WARNING
The PARKTRONIC is a supplemental system.
It is not intended to, nor does it replace, the
need for extreme care. The responsibility
during parking and other critical maneuvers
alway ...
Checking tire pressure electronically
– Make sure that the SmartKey is in position
2 in the ignition lock.
– Press the or
button on the
steering wheel to select the Serv. menu.
– Press the or
button to select
Tire Pressure.
...