Vehicles with automatic transmission

•► Shift the transmission to position P.

Using the SmartKey

•► Turn the SmartKey to position 0 in the ignition lock and remove it.
The immobilizer is activated.
•► Apply the parking brake firmly.

If you turn off the engine with the SmartKey and then remove it from the ignition lock or open a front door, the automatic transmission shifts to P automatically.

Using KEYLESS-GO

•► Press the Start/Stop button.

The engine stops and all the indicator lamps in the instrument cluster go out.
•► Apply the parking brake firmly.

If you use the Start/Stop button to switch off the engine, the automatic transmission shifts to N automatically. If you then open the driver's or front-passenger door, the automatic transmission shifts to P.

In an emergency, the engine can be turned off while the vehicle is in motion by pressing and holding the Start/Stop button for three seconds.

If you have started the engine with the Start/ Stop button and it cannot be switched off as described:

•► remove the Start/Stop button from the ignition lock.
•► insert the SmartKey into the ignition lock.

The engine switches off. The ignition is in position 0.

    See also:

    Programming the integrated garagedoor opener on the rear-view mirror
    Programming WARNING   Only press the transmitter button on the integrated garage door opener if there are no persons or objects present within the sweep of the garage door. People could ...

    System self-test
    After you have switched on the ignition, the system carries out a self-diagnosis. WARNING A malfunction in the system has been detected if one of the following conditions occurs: • the in ...

    Guide lines in the COMAND display
    WARNING Use of rear view camera can be dangerous if you are color-blind or have impaired color vision. Only use rear view camera if you can see and distinguish all colored guidelines shown ...