Folding out the folding bench seat

•► Make sure that the backrests of the rear

•► Make sure that the backrests of the rear bench seat are locked in the upright position.

•► Move the handle for the combined cargo cover and net upwards.

•► Pull release handle 1 and fold the backrest of the folding bench seat upwards.

•► Hook the seat belts into retainers 3.

•► Hook the seat belts into retainers 3.

•► Pull release handle 2 and fold the folding bench seat cushion into the sitting position.

•► Push down the seat cushion until the backrest engages fully.

•► Fold the head restraints upwards.

    See also:

    Towing the vehicle with the rear axle raised
    Only possible on vehicles without 4MATIC. When towing your vehicle with the rear axle raised, it is important that you observe the safety instructions (). The ignition must be switched off if y ...

    ETS/4ETS (Electronic Traction System)
    WARNING Observe "Important safety notes". Traction control is part of ESP®. Traction control brakes the drive wheels individually if they spin. This enables you to pull away and acc ...

    Driving downhill
    - Drive slowly. - Do not drive at an angle down steep inclines. Steer into the line of fall and drive with the front wheels aligned straight. Otherwise, the vehicle could slip sideways, tip an ...